README.md

@@ -1,6 +1,6 @@
 # openUF — C
 
-Daemon that makes an OpenWrt router appear as a **UniFi U6 InWall** to the UniFi Network controller.
+Daemon that makes an OpenWrt router appear as a UniFi AP to UniFi Network controllers.
 
 ## Implemented Features
 
@@ -20,75 +20,71 @@ Daemon that makes an OpenWrt router appear as a **UniFi U6 InWall** to the UniFi
 | **LLDP Send** | Custom frames via AF_PACKET raw socket | `lldp.c` → `lldp_send_frame()` |
 | **LLDP Read** | Neighbors for UniFi topology | `lldp.c` → `lldpctl -f json` |
 
-## Quick Installation
+## Using the dev container
 
-```sh
+```shell
-# On the OpenWrt device:
+# OpenWRT build directory
-opkg update
+cd /home/openwrt/openwrt
-opkg install gcc make libmbedtls-dev libuci-dev libjson-c-dev
 
-# Compile and install
+# clean Previous builds
-make -f Makefile.standalone install
+make clean
 
-# Configure
+# Compile
-vi /etc/openuf/openuf.conf   # adjust controller_ip and lan_if
+make
+```
 
-# Start
+## Changing Compiler Settings
-/etc/init.d/openuf start
-/etc/init.d/openuf enable    # start on boot
 
+```shell
+# OpenWRT build directory
+cd /home/openwrt/openwrt
+
+# Change settings
+make menuconfig
+
+# export settings
+./scripts/diffconfig.sh
+
+# Paste settings into .devcontainer/openwrt.config file in the code
+# Then rebuild the dev container by pressing F1 in VScode
+# and typing rebuild and selecting rebuild dev container
 ```
 
 ## Configuration
 
+On The Accesspoint Run this to install the package:
+
+```shell
+# Remove old installation
+apk -r del openuf 
+
+# Install new version
+apk add openuf-0.4.0-r1.apk --allow-untrusted
+
+# Configure
+vi /etc/openuf/openuf.conf
+```
+
+Example Configuration
+
 ```ini
 controller_ip   = 192.168.1.1   # UniFi controller IP
-lan_if          = br-lan        # LAN interface (for MAC and IP)
+lan_if          = br-lan        # Default Lan interface Name
 ufmodel         = u6-inwall     # emulated model
-inform_interval = 10            # seconds between informs
+inform_interval = 10            # inform interval
 enable_announce = 1
-enable_inform   = 1
+enable_inform   = 1             # Enable logging to /var/log/openuf.log if set to 1
 
 ```
 
-## U6 InWall Model
+---
 
-A **U6 IW** is emulated because it has 5 GbE ports, which covers most OpenWrt routers. The model reports:
+## Glassary
 
-* 5 ethernet ports (eth0-eth4)
+### TNBU 
-* 2.4 GHz WiFi 6 Radio (HE/802.11ax)
-* 5 GHz WiFi 6 Radio (HE/802.11ax)
 
-## LLDP
+TNBU is the magic string/identifier at the start of the binary packet format used in this custom Inform protocol implementation.
 
-For visual topology in UniFi:
+### CCQ
 
-```sh
+Client Connection Quality
-opkg install lldpd
-/etc/init.d/lldpd start
-/etc/init.d/lldpd enable
-
-```
-
-openuf sends its own LLDP frames even without lldpd (raw socket).
-With lldpd installed, it also reports upstream neighbors (switches).
-
-## Adoption
-
-The process is automatic:
-
-1. The AP appears as "Pending" in UniFi.
-2. Click on "Adopt" → the controller sends a new key.
-3. The AP applies the key and becomes "Connected".
-4. The controller pushes the WiFi configuration (SSIDs, channels, etc.).
-5. Make sure your WiFi Name doesn't have characters like " - " cause of bad JSON! Grrr
-
-To reset: `rm /etc/openuf/state.json && reboot`
-
-## Dependencies
-
-```sh
-opkg install libmbedtls libuci libjson-c
-opkg install lldpd   # optional, for topology
-
-```

legend.md

@@ -1,2 +0,0 @@
-TNBU -  TNBU is the magic string/identifier at the start of the binary packet format used in this custom Inform protocol implementation.
-CCQ     Client Connection Quality

src/inform.c

@@ -363,6 +363,8 @@ static struct json_object *build_vap_table(const uf_model_t *m)
         const char *ifname   = NULL;
         int vlan_id = 0;
         int is_11r = 0;
+        int band_steering = 0;
+        int handoff_suggestions = 0;
 
         if (json_object_object_get_ex(vap, "essid",  &v)) essid    = json_object_get_string(v);
         if (json_object_object_get_ex(vap, "name",   &v)) vap_name = json_object_get_string(v);
@@ -373,6 +375,10 @@ static struct json_object *build_vap_table(const uf_model_t *m)
         if (json_object_object_get_ex(vap, "vlan_id", &v)) vlan_id = json_object_get_int(v);
         if (json_object_object_get_ex(vap, "fast_roaming_enabled", &v))
             is_11r = json_object_get_boolean(v);
+        if (json_object_object_get_ex(vap, "band_steering", &v))
+            band_steering = json_object_get_boolean(v);
+        if (json_object_object_get_ex(vap, "handoff_suggestions", &v))
+            handoff_suggestions = json_object_get_boolean(v);
 
         /* Map band → wlan interface and current channel */
         char wlan_iface[32] = "phy0-ap0";
@@ -427,6 +433,12 @@ static struct json_object *build_vap_table(const uf_model_t *m)
             json_object_new_int(channel));
         json_object_object_add(o, "tx_power",
             json_object_new_int(tx_pwr));
+        json_object_object_add(o, "band_steering",
+            json_object_new_boolean(band_steering));
+        json_object_object_add(o, "bss_transition",
+            json_object_new_boolean(handoff_suggestions));
+        json_object_object_add(o, "handoff_suggestions",
+            json_object_new_boolean(handoff_suggestions));
         json_object_object_add(o, "num_sta",
             json_object_new_int(num_sta));
         json_object_object_add(o, "rx_bytes",

src/models.c

@@ -158,8 +158,8 @@ static const uf_radio_map_t uapg2aclr_rmap[] = {
 const uf_model_t model_uapg2aclr = {
     .model="U2IW", .model_display="UAP-AC-LR", .display_name="UAP-AC-LR",
     .platform="U2IW", .board_rev=2, .has_eth1=false,
-    .fw_pre="U2IW.qca956x.v", .fw_ver="6.7.54.15663",
+    .fw_pre="U2IW.qca956x.v", .fw_ver="5.43.31.15663",
-    .fw_buildtime="260615.1200", .fw_factoryver="6.7.54.15663",
+    .fw_buildtime="260615.1200", .fw_factoryver="5.43.31.15663",
     .radio_table=uapg2aclr_radios, .radio_table_len=2,
     .port_table=uapg2aclr_ports,   .port_table_len=1,
     .ethernet_table=uapg2aclr_eth, .ethernet_table_len=1,

src/wlan.c

@@ -75,6 +75,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#include <unistd.h>
 #include <uci.h>
 #include <json-c/json.h>
 
@@ -134,6 +135,60 @@ static void mobility_domain_for_ssid(const char *ssid, char out[5])
     snprintf(out, 5, "%04x", (hash ^ (hash >> 16)) & 0xffffu);
 }
 
+/* Return true when an OpenWrt radio is backed by the ath9k kernel driver. */
+static int radio_uses_ath9k(const char *device_name)
+{
+    int phy_index;
+    if (!device_name || sscanf(device_name, "radio%d", &phy_index) != 1)
+        return 0;
+
+    char path[128];
+    char target[256];
+    snprintf(path, sizeof(path),
+             "/sys/class/ieee80211/phy%d/device/driver", phy_index);
+    ssize_t length = readlink(path, target, sizeof(target) - 1);
+    if (length < 0)
+        return 0;
+    target[length] = '\0';
+    return strstr(target, "ath9k") != NULL;
+}
+
+/* Detect a full hostapd/wpad package built with 802.11v WNM support. */
+static int hostapd_supports_bss_transition(void)
+{
+    static int cached = -1;
+    if (cached >= 0)
+        return cached;
+
+    cached = 0;
+    /*
+     * Do not search binary strings: basic wpad contains the option name in
+     * ancillary code even though its configuration parser rejects it.
+     */
+    FILE *probe = popen(
+        "(apk info -e wpad >/dev/null 2>&1 || "
+        "apk info -e wpad-mbedtls >/dev/null 2>&1 || "
+        "apk info -e wpad-openssl >/dev/null 2>&1 || "
+        "apk info -e wpad-wolfssl >/dev/null 2>&1 || "
+        "apk info -e hostapd-mbedtls >/dev/null 2>&1 || "
+        "apk info -e hostapd-openssl >/dev/null 2>&1 || "
+        "apk info -e hostapd-wolfssl >/dev/null 2>&1 || "
+        "opkg status wpad 2>/dev/null | grep -q 'install ok installed' || "
+        "opkg status wpad-mbedtls 2>/dev/null | grep -q 'install ok installed' || "
+        "opkg status wpad-openssl 2>/dev/null | grep -q 'install ok installed' || "
+        "opkg status wpad-wolfssl 2>/dev/null | grep -q 'install ok installed') "
+        "&& echo true",
+        "r");
+    if (probe) {
+        char value[16] = {0};
+        if (fgets(value, sizeof(value), probe) &&
+            !strncmp(value, "true", 4))
+            cached = 1;
+        pclose(probe);
+    }
+    return cached;
+}
+
 /* Read a UniFi boolean while accepting names used by controller versions. */
 static int json_boolean_any(struct json_object *object,
                             const char *const *keys, size_t key_count)
@@ -144,22 +199,34 @@ static int json_boolean_any(struct json_object *object,
             continue;
         if (json_object_is_type(value, json_type_string)) {
             const char *text = json_object_get_string(value);
-            return !strcasecmp(text, "enabled") || !strcasecmp(text, "true") ||
+            if (!text || !text[0] || !strcasecmp(text, "disabled") ||
-                   !strcasecmp(text, "on") || !strcmp(text, "1");
+                !strcasecmp(text, "false") || !strcasecmp(text, "off") ||
+                !strcasecmp(text, "none") || !strcmp(text, "0"))
+                return 0;
+            /* Also accepts controller modes such as "prefer_5g". */
+            return 1;
         }
         return json_object_get_boolean(value) ? 1 : 0;
     }
     return 0;
 }
 
-/* Safe UCI section name (maximum 15 characters). */
+/* Interpret Boolean text and UniFi feature modes such as "prefer_5g". */
+static int feature_text_enabled(const char *text)
+{
+    return text && text[0] && strcasecmp(text, "disabled") &&
+           strcasecmp(text, "false") && strcasecmp(text, "off") &&
+           strcasecmp(text, "none") && strcmp(text, "0");
+}
+
+/* Safe UCI identifier fragment (maximum 15 characters). */
 static void safe_section_name(const char *ssid, char *out, size_t sz)
 {
     size_t j = 0;
     for (size_t i = 0; ssid[i] && j < sz-1 && j < 15; i++) {
         char c = ssid[i];
         if ((c>='a'&&c<='z')||(c>='A'&&c<='Z')||
-            (c>='0'&&c<='9')||c=='_'||c=='-')
+            (c>='0'&&c<='9')||c=='_')
             out[j++] = c;
         else
             out[j++] = '_';
@@ -176,9 +243,11 @@ static int uci_set_val(struct uci_context *ctx,
     if (!p) return -1;
     sprintf(p, "%s=%s", path, val);
     int ret = uci_lookup_ptr(ctx, &ptr, p, true);
+    if (ret == UCI_OK)
+        ret = uci_set(ctx, &ptr);
+    /* ptr.value may point inside p, so free it only after uci_set(). */
     free(p);
-    if (ret != UCI_OK) return -1;
+    return ret == UCI_OK ? 0 : -1;
-    return (uci_set(ctx, &ptr) == UCI_OK) ? 0 : -1;
 }
 /* Set and verify an option whose absence would make a VAP unusable. */
 static int uci_set_required(struct uci_context *ctx,
@@ -209,9 +278,11 @@ static int uci_add_list_val(struct uci_context *ctx,
     if (!assignment) return -1;
     sprintf(assignment, "%s=%s", path, val);
     int ret = uci_lookup_ptr(ctx, &ptr, assignment, true);
+    if (ret == UCI_OK)
+        ret = uci_add_list(ctx, &ptr);
+    /* ptr.value may point inside assignment. */
     free(assignment);
-    if (ret != UCI_OK) return -1;
+    return ret == UCI_OK ? 0 : -1;
-    return uci_add_list(ctx, &ptr) == UCI_OK ? 0 : -1;
 }
 
 
@@ -509,6 +580,7 @@ static int apply_vap(struct uci_context *ctx,
                      struct uci_package *pkg,
                      struct json_object *vap_json,
                      const char *device_name,
+                     const char *radio_band,
                      const char *mac_str,
                      int vap_idx)
 {
@@ -616,6 +688,20 @@ static int apply_vap(struct uci_context *ctx,
     };
     int ft = json_boolean_any(vap_json, ft_keys,
                               sizeof(ft_keys) / sizeof(ft_keys[0]));
+
+    /*
+     * This legacy 2.4 GHz ath9k PHY rejects every FT beacon tested, including
+     * WPA2 with PMF disabled. Preserve the controller request for telemetry,
+     * but disable 802.11r on this one unsupported PHY so the BSS can start.
+     */
+    if (ft && radio_band && !strcmp(radio_band, "ng") &&
+        radio_uses_ath9k(device_name)) {
+        UCI_SET_INT(ctx, "wireless", sec_name, "openuf_ft_requested", 1);
+        ft = 0;
+        printf("[openuf] Disabled FT on unsupported 2.4 GHz ath9k radio %s\n",
+               device_name);
+    }
+
     if (ft) {
         char mdomain[5];
         mobility_domain_for_ssid(essid, mdomain);
@@ -628,43 +714,77 @@ static int apply_vap(struct uci_context *ctx,
         UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211r", 0);
     }
 
-    /* ── Band Steering (802.11k/v) ────────────────────────────────
+    /* Enable the hostapd capabilities used by steering and 802.11v hints. */
-     * 802.11k: Neighbor Reports → the AP tells the client what other
+    const char *band_steer_keys[] = {
-     *          APs exist to facilitate roaming.
+        "band_steering", "band_steering_enabled", "steering_enabled"
-     * 802.11v: BSS Transition Management → the AP can "suggest" to the
+    };
-     *          client to move to another AP with better signal.*/
+    const char *handoff_keys[] = {
-    int band_steer = 0;
+        "bss_transition", "bss_transition_enabled",
-    if (json_object_object_get_ex(vap_json, "band_steering", &v))
+        "bss_transition_management", "handoff_suggestions",
-        band_steer = json_object_get_boolean(v) ? 1 : 0;
+        "handoff_suggestions_enabled", "ieee80211v"
-    if (band_steer) {
+    };
-        UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211k",           1);
+    int band_steer = json_boolean_any(
-        UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211v",           1);
+        vap_json, band_steer_keys,
-        UCI_SET_INT(ctx, "wireless", sec_name, "rrm_neighbor_report",  1);
+        sizeof(band_steer_keys) / sizeof(band_steer_keys[0]));
+    int handoff = json_boolean_any(
+        vap_json, handoff_keys,
+        sizeof(handoff_keys) / sizeof(handoff_keys[0]));
+    int rrm = band_steer || handoff;
+    int bss_transition_requested = band_steer || handoff;
+    int bss_transition = bss_transition_requested &&
+                         hostapd_supports_bss_transition();
+
+    UCI_SET_INT(ctx, "wireless", sec_name, "openuf_band_steering",
+                band_steer);
+    UCI_SET_INT(ctx, "wireless", sec_name, "openuf_handoff_suggestions",
+                handoff);
+    UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211k", rrm);
+    UCI_SET_INT(ctx, "wireless", sec_name, "rrm_neighbor_report", rrm);
+    UCI_SET_INT(ctx, "wireless", sec_name, "rrm_beacon_report", rrm);
+    /*
+     * The ucode Wi-Fi backend serializes even bss_transition=0. Reduced wpad
+     * rejects the unknown option, so omit it completely unless WNM exists.
+     */
+    if (bss_transition)
         UCI_SET_INT(ctx, "wireless", sec_name, "bss_transition", 1);
-    } else {
+    if (bss_transition_requested && !bss_transition)
-        UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211k", 0);
+        printf("[openuf] Handoff Suggestions requested, but installed "
-        UCI_SET_INT(ctx, "wireless", sec_name, "ieee80211v", 0);
+               "hostapd lacks 802.11v WNM support; install wpad-mbedtls\n");
-    }
 
     /* Record the controller VLAN for telemetry and diagnostics. */
     if (vid > 0)
         UCI_SET_INT(ctx, "wireless", sec_name, "vlan_id", vid);
 
-    /* Reassert the binding last and reject incomplete UCI sections. */
+    /* Reassert and validate every option required to start a secure AP. */
     if (uci_set_required(ctx, pkg, sec_name, "device", device_name) != 0) {
         printf("[openuf] Failed to bind VAP '%s' to %s\n",
                essid, device_name);
         return -1;
     }
+    if (uci_set_required(ctx, pkg, sec_name, "mode", "ap") != 0 ||
+        uci_set_required(ctx, pkg, sec_name, "ssid", essid) != 0 ||
+        uci_set_required(ctx, pkg, sec_name, "encryption",
+                         sec_to_uci(security)) != 0) {
+        printf("[openuf] Refusing incomplete VAP '%s': core AP options "
+               "could not be stored\n", essid);
+        return -1;
+    }
+    if (pass && pass[0] && strcmp(security, "open") != 0 &&
+        uci_set_required(ctx, pkg, sec_name, "key", pass) != 0) {
+        printf("[openuf] Refusing unsecured VAP '%s': key could not be stored\n",
+               essid);
+        return -1;
+    }
     if (uci_set_required(ctx, pkg, sec_name, "network", target_network) != 0) {
         printf("[openuf] Refusing unsafe VAP '%s': cannot bind to %s\n",
                essid, target_network);
         return -1;
     }
 
-    printf("[openuf] VAP '%s' -> %s device=%s network=%s enc=%s ft=%d bs=%d pmf=%d\n",
+    printf("[openuf] VAP '%s' -> %s device=%s network=%s enc=%s "
+           "ft=%d bs=%d handoff=%d pmf=%d\n",
            essid, sec_name, device_name, target_network, sec_to_uci(security),
-           ft, band_steer, pmf);
+           ft, band_steer, handoff, pmf);
     return 0;
 }
 
@@ -790,6 +910,7 @@ int wlan_apply_config(struct json_object *config_json,
                     continue;
                 int section_idx = i * model->radio_map_len + j;
                 if (apply_vap(ctx, pkg, vap, model->radio_map[j].device,
+                              model->radio_map[j].band,
                               mac_str, section_idx) != 0) {
                     uci_unload(ctx, pkg);
                     uci_free_context(ctx);
@@ -821,10 +942,61 @@ int wlan_apply_config(struct json_object *config_json,
     uci_unload(ctx, pkg);
     uci_free_context(ctx);
 
-    /* Reload netifd for generated VLAN devices, then start only the new VAPs. */
+    /*
-    printf("[openuf] Starting controller-managed Wi-Fi...\n");
+     * Reload netifd for generated VLAN devices, then bring the radios up one
+     * at a time. Some dual-ath9k devices intermittently fail their first beacon
+     * setup after ACS. Start and verify each PHY independently, retrying a failed radio so
+     * provisioning cannot leave one band visible but unusable.
+     */
+    printf("[openuf] Starting controller-managed Wi-Fi sequentially...\n");
     system("ubus call network reload >/dev/null 2>&1");
-    system("wifi up >/dev/null 2>&1");
+    for (int i = 0; i < model->radio_map_len; i++) {
+        char command[256];
+        const char *device = model->radio_map[i].device;
+
+        /* Model radio names are internal constants, but validate defensively. */
+        if (!device ||
+            strspn(device,
+                   "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_-") !=
+                strlen(device)) {
+            printf("[openuf] Refusing invalid radio name\n");
+            continue;
+        }
+
+        int radio_up = 0;
+        for (int attempt = 1; attempt <= 2 && !radio_up; attempt++) {
+            printf("[openuf] Starting %s (%s), attempt %d...\n",
+                   device, model->radio_map[i].band, attempt);
+            snprintf(command, sizeof(command),
+                     "wifi up %s >/dev/null 2>&1", device);
+            system(command);
+
+            /* ACS normally takes 6-8 seconds on this ath9k hardware. */
+            sleep(10);
+            int phy_index = -1;
+            if (sscanf(device, "radio%d", &phy_index) != 1)
+                phy_index = -1;
+            snprintf(command, sizeof(command),
+                     "iw dev phy%d-ap0 info 2>/dev/null | "
+                     "grep -q '^[[:space:]]*ssid ' && echo true",
+                     phy_index);
+            FILE *status = popen(command, "r");
+            if (status) {
+                char value[16] = {0};
+                if (fgets(value, sizeof(value), status) &&
+                    !strncmp(value, "true", 4))
+                    radio_up = 1;
+                pclose(status);
+            }
+
+            if (!radio_up)
+                printf("[openuf] %s did not reach the up state; retrying\n",
+                       device);
+        }
+
+        if (!radio_up)
+            printf("[openuf] %s failed after 2 start attempts\n", device);
+    }
     return 0;
 }
 
@@ -946,6 +1118,36 @@ int wlan_apply_system_cfg(const char *system_cfg,
             json_object_object_add(vap, "fast_roaming_enabled",
                 json_object_new_boolean(!strcmp(value, "enabled")));
 
+        const char *band_steer_suffixes[] = {
+            "band_steering", "band_steering_enabled", "steering"
+        };
+        for (size_t n = 0;
+             n < sizeof(band_steer_suffixes) /
+                 sizeof(band_steer_suffixes[0]); n++) {
+            snprintf(key, sizeof(key), "aaa.%d.%s", i,
+                     band_steer_suffixes[n]);
+            if (system_cfg_get(system_cfg, key, value, sizeof(value))) {
+                json_object_object_add(vap, "band_steering",
+                    json_object_new_boolean(feature_text_enabled(value)));
+                break;
+            }
+        }
+
+        const char *handoff_suffixes[] = {
+            "bss_transition", "bss_transition_enabled",
+            "handoff_suggestions", "handoff_suggestions_enabled"
+        };
+        for (size_t n = 0;
+             n < sizeof(handoff_suffixes) / sizeof(handoff_suffixes[0]); n++) {
+            snprintf(key, sizeof(key), "aaa.%d.%s", i,
+                     handoff_suffixes[n]);
+            if (system_cfg_get(system_cfg, key, value, sizeof(value))) {
+                json_object_object_add(vap, "bss_transition",
+                    json_object_new_boolean(feature_text_enabled(value)));
+                break;
+            }
+        }
+
         snprintf(key, sizeof(key), "aaa.%d.pmf.mode", i);
         if (system_cfg_get(system_cfg, key, value, sizeof(value))) {
             const char *pmf = !strcmp(value, "2") ? "required" :
@@ -1055,7 +1257,11 @@ struct json_object *wlan_get_vap_table(const uf_model_t *model)
         const char *enc    = UCI_GET("encryption");
         const char *dis    = UCI_GET("disabled");
         const char *r11    = UCI_GET("ieee80211r");
+        const char *ft_req = UCI_GET("openuf_ft_requested");
         const char *k11    = UCI_GET("ieee80211k");
+        const char *btm    = UCI_GET("bss_transition");
+        const char *bs_req = UCI_GET("openuf_band_steering");
+        const char *ho_req = UCI_GET("openuf_handoff_suggestions");
         const char *w11    = UCI_GET("ieee80211w");
         const char *hidden = UCI_GET("hidden");
         const char *vap_id = UCI_GET("openuf_vap_id");
@@ -1099,8 +1305,12 @@ struct json_object *wlan_get_vap_table(const uf_model_t *model)
             if (!strcmp(w11,"2")) pmf = "required";
         }
 
-        bool ft_on = (r11 && !strcmp(r11,"1"));
+        bool ft_on = (r11 && !strcmp(r11,"1")) ||
-        bool bs_on = (k11 && !strcmp(k11,"1"));
+                     (ft_req && !strcmp(ft_req,"1"));
+        bool bs_on = bs_req ? !strcmp(bs_req, "1") :
+                              (k11 && !strcmp(k11, "1"));
+        bool handoff_on = ho_req ? !strcmp(ho_req, "1") :
+                                   (btm && !strcmp(btm, "1"));
         bool hid   = (hidden && !strcmp(hidden,"1"));
         bool up    = !(dis && !strcmp(dis,"1"));
 
@@ -1115,6 +1325,8 @@ struct json_object *wlan_get_vap_table(const uf_model_t *model)
         json_object_object_add(o, "hide_ssid",           json_object_new_boolean(hid));
         json_object_object_add(o, "fast_roaming_enabled",json_object_new_boolean(ft_on));
         json_object_object_add(o, "band_steering",       json_object_new_boolean(bs_on));
+        json_object_object_add(o, "bss_transition",      json_object_new_boolean(handoff_on));
+        json_object_object_add(o, "handoff_suggestions", json_object_new_boolean(handoff_on));
         json_object_object_add(o, "pmf_mode",            json_object_new_string(pmf));
         json_object_object_add(o, "num_sta",             json_object_new_int(0));
         if (vlan && atoi(vlan) > 0)